 
|
 |
  |
 |
 |
| print on oval object
- mug |
print on oval object
- pail |
| Technical
Data |
| Output
per hour |
500-1200 |
| Max. size flat object |
500x700 mm |
| Electrical connection |
max 2,9 kW/220V/50Hz |
| Air consumption |
max 150 NL/min |
| Air pressure |
5 bar |
| Weight |
370 kg |
Screen printing machine ASP100LS is
designed for permanent multi-color-prints directly on different
shapes made of plastics, glassware, metal, paper, cartoon etc.
Printing process is semi-automatic: loading and unloading are
manual whereas the process of printing is fully automatic.
Screen printing machines are
equipped with modern servodrives AC. Synchronization between
a sieve and a swivel of printed objects takes place on an electronic
way. It is featured solution big accuracy of print and enables
quick rearming of a machine because this solution eliminates
necessity of making cogged circles about printed object diameter.
Machine enables for quick change
mounting and positioning for cylindrical, oval and rectangular
objects or indexing table for flat object. Mechanical and electronic
system of positioning can be used for multi-color printing on
cylindrical object. In the case of printing on flat object characterized
by multi-angle section electronically steered turn-table can
be used.
The speed of squeegee head (or
printing screen), the range of print, rotating speed of object
while being positioned, time of holding the object, time of
break in automatic cycle, the sequence of squeegee and collector
work during printing and other parameters can be determined
in a simple way by the keyboard in the steering panel.
Microcomputer
controls the operation of the machine which in turn enables
for additional supportive functions: multiplied print, mixing
and collecting print on a printing screen, counting the number
of cycles as well as adjusting the operation of the machine
to individual need of the user. Information concerning operation
status and parameters are show on liquid crystal screen in the
steering panel.
The printing cycle can
be started by a foot-level or automatically and stopped in emergency
in any moment of its operation by the other foot-level or by
a button in a steering panel.
Pneumatic
units enables for smooth regulation of mounting clamp and the
pressure of blow out.
Squeegee head is equipped with a pneumatic system of regulation
of squeegee rubber clamp into surface, regulation of squeegee
lifting and regulation of squeegee and collector slope in three
planets. The movement of squeegee and collector are independent
which, apart from printing, enables for collecting and mixing
paint of printing screen. Printing and paint mixing are possible
also by a squeegee without the use of collectors.
Firm
indexing table is a construction of glued elements made of aluminum
alloy with the eloxal or plastic surface. Under-pressure in
the indexing table is generated by a silent-running vacuum unit.
Time of under-pressure is regulated freely in the steering panel.
Tables can be equipped with base pins, hidden while printing,
or movable block with base pins. Indexing table can entirely
move outside the surface of printing screen.
The
machine can be equipped with rotating vertical or horizontal
tables and set into different technological chains.
The
machine is build from parts delivered by well-known producers:
single row bearings INA, STAR, HOERBIGER, pneumatic units FESTO,
electronics SCHNEIDER, SIEMENS, MEGATRON.
| Device list: |
-
201/202. Cylindrical printing device
with the possibility of pressured air blow out;
mechanical positioning for adjusting (201)
positioning controlled by photo-cell (202)
-
203/205. Hollow cylindrical printing
device with the possibility of vacuum positioning
by the impulse pressured air;
mechanical positioning for adjusting pin (203)
shape positioning (205)
-
204. Dust-cleaning module for cylindrical
object
-
206/207. Device for mounting oval
object with the possibility of pressured air blow
out;
for one-side printing (206)
for two side printing (207)
-
208. Pen registered printing device.
The possibility of positioning object in the case
of multicolor printing
-
209. Device for small, flat object
-
210. Device for printing on flat
bottles and canisters with the possibility of pressured
air blow out
-
211. Device for printing on flat
objects characterized by multi-section with the
use of electronically controlled turn-table
-
212. Indexing table for printing
on flat objects with support enabling to lift it
into printing working area. Mounting by under screens
-
213. Power supply for warming up
metal and metallized printing screens
-
214. Rack support
-
215. Turn table with bracket
-
217. Print on rectangular object
|
|
| Print on cylindical,
conical and oval object. |
 |
 |
 |
201.
Mechanical positioning |
202.
Photooptical positioning |
203.
Cosmetic jars
M echanical positioning
204.
Dust cleaning module |
 |
 |
 |
205.
Hollow cylindrical or slighty
conical object |
206.
One side printing
207.
Two side printing
Oval object
Printing radius 30-150 mm |
208.
Pens
Registered printing |
| Print on flat
object |
 |
 |
 |
209.
Shape positioning |
210.
Shape positioning with automatic mounting and possibility
of blow out |
211
Print on rigid flat object with electronically steere turn table |
 |
 |
|
212.
Print on flat object
with moving table
(max. mm 210 x 420 h=20) |
216.
Print on rectangular object |
|
|
