 
|
 |
 |
| print on flat object |
| |
| Technical
Data |
| Output
per hour |
500-1200 |
| Max. size flat object |
500 x 700 mm |
| Electrical connection |
max. 0,8 kW/220V/50Hz |
| Air consumption |
max. 150 NL/min |
| Air pressure |
4 bar |
| Weight |
350 kg |
Screen printing machine ASP100L is designed
for permanent multi-color-prints directly on different shapes
made of plastics, glassware, metal, paper, cartoon etc. Printing
process is semi-automatic: loading and unloading are manual
whereas the process of printing is fully automatic.
Machine enables for quick change mounting and positioning for
cylindrical, oval and rectangular objects or indexing table
for flat object. Mechanical and electronic system of positioning
can be used for multi-color printing on cylindrical object.
In the case of printing on flat object characterized by multi-angle
section electronically steered turn-table can be used.
The
speed of squeegee head (or printing screen), the range of print,
rotating speed of object while being positioned, time of holding
the object, time of break in automatic cycle, the sequence of
squeegee and collector work during printing and other parameters
can be determined in a simple way by the keyboard in the steering
panel.
Microcomputer controls the operation
of the machine which in turn enables for additional supportive
functions: multiplied print, mixing and collecting print on
a printing screen, counting the number of cycles as well as
adjusting the operation of the machine to individual need of
the user. Information concerning operation status and parameters
are show on liquid crystal screen in the steering panel.
The printing cycle can be started by a foot-level
or automatically and stopped in emergency in any moment of its
operation by the other foot-level or by a button in a steering
panel.
Pneumatic units enables for smooth
regulation of mounting clamp and the pressure of blow out.
Squeegee head is equipped with a pneumatic system of regulation
of squeegee rubber clamp into surface, regulation of squeegee
lifting and regulation of squeegee and collector slope in three
planets. The movement of squeegee and collector are independent
which, apart from printing, enables for collecting and mixing
paint of printing screen. Printing and paint mixing are possible
also by a squeegee without the use of collectors.
Firm
indexing table is a construction of glued elements made of aluminum
alloy with the eloxal or plastic surface. Under-pressure in
the indexing table is generated by a silent-running vacuum unit.
Time of under-pressure is regulated freely in the steering panel.
Tables can be equipped with base pins, hidden while printing,
or movable block with base pins. Indexing table can entirely
move outside the surface of printing screen.
The
machine can be equipped with rotating vertical or horizontal
tables and set into different technological chains.
The
machine is build from parts delivered by well-known producers:
single row bearings INA, STAR, HOERBIGER, pneumatic units FESTO,
electronics SCHNEIDER, SIEMENS, MEGATRON.
| Device list: |
-
201/202. Cylindrical printing device
with the possibility of pressured air blow out;
mechanical positioning for adjusting (201)
positioning controlled by photo-cell (202)
-
203/205. Hollow cylindrical printing
device with the possibility of vacuum positioning
by the impulse pressured air;
mechanical positioning for adjusting pin (203)
shape positioning (205)
-
204. Dust-cleaning module for cylindrical
object
-
206/207. Device for mounting oval
object with the possibility of pressured air blow
out;
for one-side printing (206)
for two side printing (207)
-
208. Pen registered printing device.
The possibility of positioning object in the case
of multicolor printing
-
209. Device for small, flat object
-
210. Device for printing on flat
bottles and canisters with the possibility of pressured
air blow out
-
211. Device for printing on flat
objects characterized by multi-section with the
use of electronically controlled turn-table
-
212. Indexing table for printing
on flat objects with support enabling to lift it
into printing working area. Mounting by under screens
-
213. Power supply for warming up
metal and metallized printing screens
-
214.Rack support
-
215. Turn table with bracket
-
216. Power supply for stepper motor
(max. 2 pieces)
|
|
| Print on cylindical,
conical and oval object. |
 |
 |
 |
201.
Mechanical positioning |
202.
Photooptical positioning |
203.
Cosmetic jars
M echanical positioning
204.
Dust cleaning module |
 |
 |
 |
205.
Hollow cylindrical or slighty
conical object |
206.
One side printing
207.
Two side printing
Oval object
Printing radius 30-150 mm |
208.
Pens
Registered printing |
| Print on
flat object |
 |
 |
 |
209.
Shape positioning |
210.
Shape positioning with automatic mounting and possibility
of blow out |
211
Print on rigid flat object with electronically steere turn
table |
 |
|
|
212.
Print on flat object
with moving table
(max. mm 210 x 420 h=20) |
|
|
|
