 
|
 |
 |
 |
 |
| print on cylindical
object |
print
on flat object |
| Technical
Data |
| Output
per hour |
500-1200 |
| Max. size flat object |
A3 (297x420 mm) |
| Electrical connection |
max 0,8 kW/220V/50Hz |
| Air consumption |
max 150 NL/min |
| Air pressure |
4 bar |
| Weight |
230 kg |
Screen printing machine ASP100 is designed
for permanent multi-color-prints directly on different shapes
made of plastics, glassware, metal, paper, cartoon etc. Printing
process is semi-automatic: loading and unloading are manual
whereas the process of printing is fully automatic.
Machine enables for quick change mounting
and positioning for cylindrical, oval and rectangular objects
or indexing table for flat object. Mechanical and electronic
system of positioning can be used for multi-color printing on
cylindrical object. In the case of printing on flat object characterized
by multi-angle section electronically steered turn-table can
be used.
The speed of squeegee head (or printing screen),
the range of print, rotating speed of object while being positioned,
time of holding the object, time of break in automatic cycle,
the sequence of squeegee and collector work during printing
and other parameters can be determined in a simple way by the
keyboard in the steering panel.
Microcomputer controls the operation of the
machine which in turn enables for additional supportive functions:
multiplied print, mixing and collecting print on a printing
screen, counting the number of cycles as well as adjusting the
operation of the machine to individual need of the user. Information
concerning operation status and parameters are show on liquid
crystal screen in the steering panel.
The printing cycle can be started by a foot-level
or automatically and stopped in emergency in any moment of its
operation by the other foot-level or by a button in a steering
panel.
Pneumatic units enables for smooth regulation
of mounting clamp and the pressure of blow out.
Squeegee head is equipped with a pneumatic system of regulation
of squeegee rubber clamp into surface, regulation of squeegee
lifting and regulation of squeegee and collector slope in three
planets. The movement of squeegee and collector are independent
which, apart from printing, enables for collecting and mixing
paint of printing screen. Printing and paint mixing are possible
also by a squeegee without the use of collectors.
Firm indexing table is a construction of glued
elements made of aluminum alloy with the eloxal or plastic surface.
Under-pressure in the indexing table is generated by a silent-running
vacuum unit. Time of under-pressure is regulated freely in the
steering panel. Tables can be equipped with base pins, hidden
while printing, or movable block with base pins. Indexing table
can entirely move outside the surface of printing screen.
The machine can be equipped with rotating
vertical or horizontal tables and set into different technological
chains.
The machine is build from parts delivered
by well-known producers: single row bearings INA, STAR, HOERBIGER,
pneumatic units FESTO, electronics SCHNEIDER, SIEMENS, MEGATRON.
| Device list: |
-
201/202. Cylindrical printing device
with the possibility of pressured air blow out;
mechanical positioning for adjusting (201)
positioning controlled by photo-cell (202)
-
203/205. Hollow cylindrical printing
device with the possibility of vacuum positioning
by the impulse pressured air;
mechanical positioning for adjusting pin (203)
shape positioning (205)
-
204. Dust-cleaning module for cylindrical
object
-
206/207. Device for mounting oval
object with the possibility of pressured air blow
out;
for one-side printing (206)
for two side printing (207)
-
208. Pen registered printing device.
The possibility of positioning object in the case
of multicolor printing
-
209. Device for small, flat object
-
210. Device for printing on flat
bottles and canisters with the possibility of pressured
air blow out
-
211. Device for printing on flat
objects characterized by multi-section with the
use of electronically controlled turn-table
-
212. Indexing table for printing
on flat objects with support enabling to lift it
into printing working area. Mounting by under screens
-
213. Power supply for warming up
metal and metallized printing screens
-
214.Rack support
-
215. Turn table with bracket
-
216. Power supply for stepper motor
(max. 2 pieces)
|
|
| Print on cylindical,
conical and oval object. |
 |
 |
 |
201.
Mechanical positioning |
202.
Photooptical positioning |
203.
Cosmetic jars
M echanical positioning
204.
Dust cleaning module |
 |
 |
 |
205.
Hollow cylindrical or slighty
conical object |
206.
One side printing
207.
Two side printing
Oval object
Printing radius 30-150 mm |
208.
Pens
Registered printing |
| Print on
flat object |
 |
 |
 |
209.
Shape positioning |
210.
Shape positioning with automatic mounting and possibility
of blow out |
211
Print on rigid flat object with electronically steere turn
table |
 |
|
|
212.
Print on flat object
with moving table
(max. mm 210 x 420 h=20) |
|
|
|
